80/20 Service & Support - UniBearing™ Profiles

Fractional mill-finish material (unanodized) is stocked in 145" lengths. The maximum length for anodized material is 120". A cut charge is required for any length other than stock.

* Maximum length for mill-finish (unanodized) material is 144"

** 6061-T6 or equivalent stock

Fractional Technical Information

Clear Anodized	Mill Finish	A	B	C	D	E	F	G	Weight
8580	8581	2.063	1.000	1.063	.250	.156	.156	.375	.586 lbs./ft
8582	8583	3.125	1.500	1.625	.312	.260	.245	.625	.971 lbs./ft

Metric Technical Information

Metric mill-finish material (unanodized) is stocked in 4 meter lengths. The maximum length for anodized material is 3 meters. A cut charge is required for any length other than stock.

Clear Anodized	Mill Finish	A	B	C	D	E	F	G	Weight
25-8580	25-8581	52.4	25.4	27.0	6.35	3.96	3.96	9.53	.872 kg./m
40-8582	40-8583	79.38	38.1	41.28	7.92	6.6	6.22	15.88	1.445 kg./m

Fractional Technicial Information

Clear Anodized	Mill Finish	A	B	C	D	E	F	G	Weight
8584	8585	3.125	1.063	1.000	.250	.156	.156	.375	.776 lbs./ft
8586	8587	4.750	1.625	1.500	.312	.260	.245	.625	1.888 lbs./ft

Metric Technicial Information

Metric mill-finish material (unanodized) is stocked in 4 meter lengths. The maximum length for anodized material is 3 meters. A cut charge is required for any length other than stock.

Clear Anodized	Mill Finish	A	B	C	D	E	F	G	Weight
25-8584	25-8585	79.38	27.0	25.4	6.35	3.96	3.96	9.53	1.155 kg./m
40-8586	40-8587	120.65	41.28	38.1	7.92	6.6	6.22	15.88	2.809 kg./m