80/20 Service & Support - Gusset Profiles

Fractional mill-finish material (unanodized) is stocked in 145" lengths. The maximum length for anodized material is 120". A cut charge is required for any length other than stock.

* Maximum length for mill-finish (unanodized) material
is 144"

** 6061-T6 or equivalent stock

Fractional Technical Information

Clear Anodized	Mill Finish	Alloy	A	B	C	D	E	Weight
8620	8621	6105-T5	1.000	1.000	.020	.188	.188	.629 lbs./ft
8630	8631	6105-T5	1.500	1.500	.020	.250	.250	1.303 lbs./ft
8625	8626	6105-T5	2.000	2.000	.020	.188	.188	1.399 lbs./ft
8635	8636	6105-T5	3.000	3.000	.020	.250	.250	2.839 lbs./ft

Metric Technical Information

Metric mill-finish material (unanodized) is stocked in 4 meter lengths. The maximum length for anodized material is 3 meters. A cut charge is required for any length other than stock.

Clear Anodized	Mill Finish	Alloy	A	B	C	D	E	Weight
25-8620	25-8621	6105-T5	25.0	25.0	0.5	4.0	4.0	.790 kg./m
40-8630	40-8631	6105-T5	40.0	40.0	0.5	6.0	6.0	2.860 kg./m
25-8625	25-8626	6105-T5	50.0	50.0	0.5	4.0	4.0	1.723 kg./m
40-8635	40-8636	6105-T5	80.0	80.0	0.5	6.0	6.0	4.189 kg./m